2024
Yoshiyuki Seike, Hiroharu Suzuki, Yusuke Ichino, Noriyuki Taoka, Tatsuo Mori: Control of Static Electricity Generated by Two-fluid Spray of Pure Water, The International Council on Electrical Engineering Conference 2024 (ICEE2024), 0-075, (Kitakyushu, Japan). 2024/7/2
Kousei Ito, Yuta Fukatsu, Tatsuo Mori, Yusuke Ichino, Noriyuki Taoka, Yoshiyuki Seike: Analysis of Charging Phenomena on Silicon Wafers with Oxide Films in Two-Fluid Spray, The International Council on Electrical Engineering Conference 2024 (ICEE2024), P-030, (Kitakyushu, Japan). 2024/7/2
Ittetsu Watanabe, Riho Hirano, Tatsuo Mori, Yusuke Ichino, Noriyuki Taoka, Yoshiyuki Seike: Electrostatic Characteristics at the Start of Two-Fluid Spray Cleaning for Semiconductors, The International Council on Electrical Engineering Conference 2024 (ICEE2024), P-002, (Kitakyushu, Japan). 2024/7/1
Yoshiyuki Seike, Yuya Isogawa, Keishiro Goshima,Yusuke Ichino, Noriyuki Taoka, Tatsuo Mori: Perovskite Solar Cells with Red Modulation using CuSCN/CA Bragg Reflectors, The 11th International Conference onMolecular Electronics & Bioelectronics （M＆Be11）, FO-01, (Matsue, Shimane, Japan). 2024/6/19.
Kensei Ueyama, Yuki Ikumi, Tatsuo Mori, Yusuke Ichino, Noriyuki Taoka, Taishi Segawa, Mikio Kato, Ryosuke Usui, Keiji Miyachi, Yoshiyuki Seike: Optimization of Spray Treatment after Active Layer Deposition for Perovskite Solar Cells, The 11th International Conference onMolecular Electronics & Bioelectronics （M＆Be11）, AP2-05. (Matsue, Shimane, Japan). 2024/6/21.
Koichi Okamoto, Tomoki Oyama, Fumiya Sato, Noriyuki Taoka, Yusuke Ichino,Yoshiyuki Seike, Seiichiro Izawa, Yutaka Majima and Tatsuo Mori: Fabrication of Polystyrene-Added Perovskite Solar Cell, FP1-04, The 11th International Conference onMolecular Electronics & Bioelectronics （M＆Be11）, AP2-05. (Matsue, Shimane, Japan). 2024/6/19.
Yuya Isogawa, Keishiro Goshima, Yusuke Ichino, Noriyuki Taoka, Tatsuo Mori, Yoshiyuki Seike: Characteristics of Inverse-structured Perovskite Solar Cells with Bragg Reflectors, 13th International Symposium on Organic Molecular Electronics (ISOME2024), O-01
Kenshin Nakahama, Yusuke Ichino, Tatsuo Mori, Noriyuki Taoka, Yoshiyuki Seike: Layering Process of Thin Films with Dot Shapes using Inkjet Method, 13th International Symposium on Organic Molecular Electronics (ISOME2024), P-33
Kensei Ueyama, Yuki Ikumi, Tatsuo Mori, Yusuke Ichino, Noriyuki Taoka,Taishi Segawa, Mikio Kato, Ryosuke Usui, Keiji Miyachi, Yoshiyuki Seike: Solvent Extraction Using Two-fluid Spray After Perovskite Layer Deposition, 13th International Symposium on Organic Molecular Electronics (ISOME2024), P-29, (Hyogo Japan). 2024/5/29
Taishi Segawa, Yuta Kato, Kensei Ueyama, Yoshiyuki Seike: Relationship between Morphology and Conductivity of PEDOT/PSS Thin Films Coated by Air Spray, 13th International Symposium on Organic Molecular Electronics (ISOME2024), P-02, (Hyogo Japan). 2024/5/29
2023
Yuya Isogawa, Kenshin Nakahama, Yusuke Ichino, Tatsuo Mori, Yoshiyuki Seike: Fabrication Technology for Inverse-Structured Perovskite Solar Cells with Copper(I) Thiocyanate/ Cellulose Acetate Distributed Bragg Reflectors, The 15th Asian Conference on Organic Electronics (A-COE), P-083, (Taipei, Taiwan). 2023/11/1
Kenshin Nakahama, Taisei Sakata, Yuya Isogawa, Tatsuo Mori, Yusuke Ichino, Yoshiyuki Seike: Fabrication of Distributed Bragg Reflector using CuSCN/CA by Inkjet Method, The 15th Asian Conference on Organic Electronics (A-COE), P-083, (Taipei, Taiwan). 2023/11/1
Yoshiyuki Seike, Hiroharu Suzuki, Yusuke Ichino, Tatsuo Mori: ESD Prevention Technology for Two-Fluid Pure Water Spray Cleaning with Controlled Electrostatic Charge, 16th International Symposium on Ultra Clean Processing of Semiconductor Surfaces (UCPSS 2023)，07-03, (Brugge, Belgium). 2023/9/13.
Yuya Isogawa, Kenshin Nakahama, Yusuke Ichino, Tatsuo Mori, Yoshiyuki Seike: Fabrication of perovskite solar cells with dielectric mirrors, The 9th International Symposium on Organic and Inorganic Electronics Materials and Related Nanotechnologies (EM-NANO 2023), PC-18, (Kanazawa Japan). 2023/6/5.
Kenshin Nakahama, Taisei Sakata, Yuya Isogawa, Tatsuo Mori, Yusuke Ichino, Yoshiyuki Seike:
Fabrication of dielectric mirrors using CuSCN/CA, The 9th International Symposium on Organic and Inorganic Electronics Materials and Related Nanotechnologies (EM-NANO 2023), PB-6, (Kanazawa Japan). 2023/6/5.
Yoshiyuki Seike: Electrostatic Discharge Prevention technology in Pure Water Spray Cleaning of Semiconductor Cleaning Process Using Machine Learning, The 9th Annual World Congress of Advanced Materials (WCAM-2023), 203-3, (Tokyo Japan). 2023/05/08 (Invited)
2022
Yoshiyuki Seike: Possibilities of Various Spray Cleaning Methods in Post-CMP Cleaning, International Conference on Precision Engineering (ICPE), (Nara Japan). 2022/11/30
Rai Takagi, Tomomi Hikita, Yuji Honda, Tatsuo Mori, Yusuke Ichino, Yoshiyuki Seike: Evaluation of a Quartz Transducer Ultrasonic Cleaning Method for the Removal and Frequency Dependence of Polystyrene Latex Particles, International Conference on Precision Engineering (ICPE), (Nara Japan). 2022/11/30
Yoshiyuki Seike, Hiroharu Suzuki, Yasuaki Fukuoka, Yusuke Ichino, Tatsuo Mori, Daiki Segawa,Mikio Kato, Keiji Miyachi: Prediction of static electricity generated by high-pressure spraying using artificial Intelligence, International Symposium on Non-thermal Plasma Technology and International Symposium on Electrohydrodynamics (ISNTP-12/ISEHD 2022), O-60, (Otaru Japan). 2022/8/28
Hiroharu Suzuki, Yasuaki Fukuoka, Keiichi Ikeda, Sota Muto, Tatsuo Mori, Yusuke Ichino, Yoshiyuki Seike: Controlling electrostatic discharge during two−fluid spray cleaning, International Symposium on Non-thermal Plasma Technology and International Symposium on Electrohydrodynamics (ISNTP-12/ISEHD 2022), P-16, (Otaru Japan). 2022/8/28
Tatsuya Kato, Yusuke Ichino, Tastuo Mori and Yoshiyuki Seike: Effects of Potassium Doping on the Active Layer of Inverse-structured Perovskite Solar Cells, 12th International Symposium on Organic Molecular Electronics (ISOME2022), O-05, (Kanagawa Japan). 2022/5/27
Yuya Isogawa, Yusuke Ichino, Tastuo Mori and Yoshiyuki Seike: Fabricating Dielectric Mirrors for Perovskite Solars Cell Applications, 12th International Symposium on Organic Molecular Electronics (ISOME2022), P30, (Kanagawa Japan). 2022/5/26
Issei Tanaka, Yusuke Ichino, Tastuo Mori and Yoshiyuki Seike: Investigation of MAPbI3 Layer Deposition Using Spray Treatment, 12th International Symposium on Organic Molecular Electronics (ISOME2022), P20, (Kanagawa Japan). 2022/5/26
Yotaku Nakashima, Yusuke Ichino, Yoshiyuki Seike, Tatsuo Mori: Fabrication and Characterization of Perovskite Solar Cells Using Mixture Solvent, 12th International Symposium on Organic Molecular Electronics (ISOME2022), P19, (Kanagawa Japan). 2022/5/26
2021
Issei Tanaka, Yusuke Ichino, Tastuo Mori and Yoshiyuki Seike: Spray Treatment of MAPbI3 Layer in Organic Perovskite Solar Cells, The 13th Asian Conference on Organic Electronics (A-COE), PB-5, (Aichi , Japan). 2021/9/2
Yotaku Nakashima, Yusuke Ichino, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Perovskite Layers Using a New Antisolvent Method, The 13th Asian Conference on Organic Electronics (A-COE), PB-5, (Aichi , Japan). 2021/9/2
Ryo Sato, Rina Yamashita, Yusuke Ichino, Yoshiyuki Seike, Tatsuo Mori: Study of Transport Mechanism in Laminated Structures of TAPC and mCP Used in High-Performance OLEDs, The 13th Asian Conference on Organic Electronics (A-COE), PA-18, (Aichi , Japan). 2021/9/2
2020
Ryo Sato, Yoshiyuki Seike, Tatsuo Mori: Hole Conduction Mechanism of α-NPD/mCP Films with High Barrier Height on TADF OLEDs, 5th International TADF Workshop / The 3rd i3-opera Forum, ON LINE, Kyushu University. 2020/12/07
Yoshiyuki Seike, Yasuaki Fukuoka, Tatsuo Mori, Taishi Segawa, Yoshinori Kobayashi, Keiji Miyachi: Clarification and Countermeasures of Electrostatic Discharge in High-Pressure Spray Cleaning During Flat-Panel Display Manufacturing, Electrical Overstress / Electrostatic Discharge Symposium, NV. USA. 2020/9/14
Tatsuya Kato, Tatsuo Mori and Yoshiyuki Seike: Influence of potassium ions on the fabrication of inverted organic perovskite solar cells Influence of potassium ions on the fabrication of inverted organic perovskite solar cells, 11th International Symposium on Organic Molecular Electronics (ISOME2020), P-22, (Aichi Japan). 2020/8/6
Ryoma Hayashi, Tatsuo Mori and Yoshiyuki Seike: Fabrication of concavoconvex PEDOT: PSS layer by inkjet-printing in inverted perovskite solar cell, 11th International Symposium on Organic Molecular Electronics (ISOME2020), P18, (Aichi Japan). 2020/8/6
Daiki Okawa, Yoshiyuki Seike, Tatsuo Mori, Effect of hybrid solutions for PbI2 on perovskite layer fabricated using 2-step method Effect of hybrid solutions for PbI2 on perovskite layer fabricated using 2-step method, 11th International Symposium on Organic Molecular Electronics, (ISOME2020), Aichi Japan. 2020/8/6
Ryo Sato, Satoru Aoyama, Yoshiyuki Seike, Tatsuo Mori: Electrical conduction of carbazole-derivatives used for TADF OLEDs, 11th International Symposium on Organic Molecular Electronics (ISOME2020), P-10, (Aichi Japan). 2020/8/6
2019
Naoki Hirohata, Hiroyasu Shimada, Yuuki Nagaya, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Organic Thin Film Photovoltaic Cells by Drop-casting, International Symposium on Novel and Sustainable Technology (2019iSNST), (Tainan, Taiwan). 2019/12/12
Satoru Aoyama, Ryo Sato, Yoshiharu Ichikawa, Yoshiyuki Seike, Tatsuo Mori: Investigation of Electrical Conduction of mCP and mCBP Thin Films Used to TADF OLEDs, International Symposium on Novel and Sustainable Technology (2019iSNST), (Tainan Taiwan). 2019/12/12.
Naoki Hirohata, Yoshiyuki Seike, Tatsuo Mori: Fabrication of DBP-based Organic Photovoltaic Cells by Drop-Cast Method, International Workshop on Green Energy System and Device (IWGESD2019), GED-P-8, (Aichi Japan). 2019/12/2
Ryoma Hayashi, Tatsuo Mori, Yoshiyuki Seike: Effect of Hole Transport Layer Deposited by Inkjet Printing in Perovskite Solar Cells, International Workshop on Green Energy System and Device (IWGESD2019), GED-P-7, (Aichi Japan). 2019/12/2
Yoshiki Kondo, Yoshiyuki Seike, Tatsuo Mori: Formation Process of Organic Perovskite Active Layer Using 2-Step Method, International Workshop on Green Energy System and Device (IWGESD2019), GED-P-6, (Aichi Japan). 2019/12/2
Satoru Ayoyama, Ryo Sato, Yoshru Ichikawa, Yoshiyuki Seike, Ttsuo Mori: Conduction Behaviors of Carrier Transport Materials Used in TADF OLEDS, International Workshop on Green Energy System and Device (IWGESD2019), GED-P-5, (Aichi, Japan). 2019/12/2
Ryoma Hayashi, Tatsuo Mori, Yoshiyuki Seike: Inkjet Deposition Technology of Hole Transport Layer in Inverted Structure Type Perovskite Solar Cell, The 11th Asian Conference on Organic Electronics (A-COE), PP-114, (Taipei, Taiwan). 2019/11/16
Tatsuo Mori, Yoshiki Kondo, Yoshiyuki Seike : Crystallization Process of Perovskite fro PBI2 on 2-step Solution Fabrication for Organic Perovskite Solar Cells, The 11th Asian Conference on Organic Electronics (A-COE), P-018. (Taipei, Taiwan). 2019/11/6
Yoshiki Kondo, Yoshiyuki Seike, Tatsuo Mori: Conversion Process to Perovskite from PBI2 Fabricated by 2-Step Method in Organic Perovskite Active Layer, The 11th Asian Conference on Organic Electronics (A-COE), P-016, (Taipei, Taiwan). 2019/11/6
Y. Seike, R. Sawaki, R. Shimizu, T. Hikida, Y. Honda, M. Sato and T. Mori: Analysis of Polyethylene Latex Particle Removal Mechanism on SiO2 Wafer Using Ultrasonic Spray Cleaning, 16th International Symposium on Semiconductor Cleaning Science and Technology (SCST 16), 1116, (Atlanta USA). 2019/10/14
Yoshiyuki Seike, Daiki Tangiku, Tatsuo Mori: Microfabrication of Organic Thin Film Photovoltaic Cell by Electrospray Deposition Method, 15th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP) 2019, Maebashi (Japan). 2019/9/27
Yoshiyuki Seike, Yoshinori Kobayahi, Keiji Miyachi, Taka Nishikawa, Tatuso Mori: Fabrication and Characterization of Organic Thin Film Photovoltaic (OPV) Cell for Spray Cating, 12th MIRAI Conference on Microfabrication and Green Technology, Kyushu University (Fukuoka). 2019/8/2
Tatsuo Mori, Satoru Aoyama, Yoshiyuki Seike: Correlation between Roll-Off Phenomena and Carrier Injections for OLEDs, THE 26th International Workshop on Active-matrix Flatpanel Displays and Devices (AM-FPD19), (Kyoto, Japan). 2019/7/2
Yoshiyuki Seike, Daiki Tangiku, Tatsuo Mori: Substrate Temperature Dependence During Deposition of Organic Thin Films Using Electrospray, 10th International Conferrence on Molecular Electronics & BioElectronics (M&BE 10), FO-19, (Nara, Japan). 2019/6/25.
Satoru Aoyama, Yoshiki Kondo, Kenichiro Narita, Maho Ito, Yoshiyuki Seike, Tatsuo Mori: Preparation of CH3NH3PbBr3 Perovskite LEDs and Addition Effect of Lead Acetate, 10th International Conferrence on Molecular Electronics & BioElectronics (M&BE 10), CP2-13, (Nara, Japan). 2019/6/25.
Naoki Hirohata, Hiroyasu Shimada, Yuki Nagaya, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Organic Thin Film Photovoltaic Cells Using The Perylene Derivative by Wet Process, The 7th International Symposium on Organic and Inorganic Electric Material and Related Nanotechnologies (EM-NANO 2019), (Nagano, Japan). 2019/6/19.
Yoshiyuki Seike, Takanari Ogawa, Yusuke Ishida, Yoshinori Kobayashi, Taishi Segawa, Keiji Miyzchi, Tatsuo Mori: Electrostatic discharge prevention in ultra-pure water spray cleaning aimed at CFM, Advanced Semiconductor Manufacturing Conference (ASMC), (NY, USA). 2019/5/6
2018
Yoshiyuki Seike, Daiki Tangiku, Daiki Kobayashi, Daisuke Hagai, Shuma Miyake, Tatsuo Mori: Deposition Technique for Organic Photovoltaic (OPV) Cell on Three-Dimensional Objects by Electrospray, The 10th Asian Conference on Organic Electronics (A-COE 2018),T-24, (City University of Hong Kong). 2018/12/5
Daiki Tangiku, Nana Inagaki, Seiya Shiiba, Daiki KObayashi, Daisuke Hagai, Shuma Miyake, Tatsuo Mori, Yoshiyuki Seike: Low Temperature Laminated Technique of OPV Aimed to Smart Contact Lens, The 10th Asian Conference on Organic Electronics (A-COE 2018), P-26, (City University of Hong Kong). 2018/12/5
Hiyoyuki Okada, Daiki Tangiku, Vicent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Perovskite Films on Rough Surface using Electrospray for Organic Perovskite Solar Cells, The 10th Asian Conference on Organic Electronics (A-COE 2018), P-05, (City University of Hong Kong). 201/12/5
Yoshiki Kondo, Hiroyuki Okada, Vicent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori: Effect of Residual PbI2 Layer in Active Layer of Organic Perovskite Solar Cells, The 10th Asian Conference on Organic Electronics (A-COE 2018), P-11, (City University of Hong Kong). 201/12/5
Masaharu Oobayashi, Shota Anan, Yoshiyuki Seike, Tatsuo Mori: Estimation of Electron Current in Alq3-Based OLEDs with HAT-CN, The 19th International Workshop on Inorganic and Organic Electroluminescence & 2018 International Conference on the Science and Technology of Emissive Displays and Lighting (EL2018), P-7, (2018). (Meiji University, Tokyo).
Satoru Aoyama, Sota Nozawa, Yoshiyuki Seike, Tatsuo Mori: Study on Luminescence and Conduction Mechanisms of Inverted Alq3-Based Organic Light-Emitting Diodes, The 19th International Workshop on Inorganic and Organic Electroluminescence & 2018 International Conference on the Science and Technology of Emissive Displays and Lighting (EL2018), P-7, (2018). (Meiji University, Tokyo).
Daiki Tangiku, Vincent Obiozo Eze, Tasuo Mori, Yoshiyuki Seike: Low Temperature Deposition Technique of PEDOT:PSS by Electrospray Method for Organic Photovoltaic Cells, 2018 KJF International Conference on Organic Materials for Electronics and Photonics (KJF-ICOMEP 2018), P-222, (2018). (Nagaragawa Gifu)
Hiroyuki Okada, Vincent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori: Performance of Organic Perovskite Solar Cells Using Hole Transport Material instead of Spiro-OMeTAD, 2018 KJF International Conference on Organic Materials for Electronics and Photonics (KJF-ICOMEP 2018), P-221, (2018). (Nagaragawa Gifu)
Vincent Obiozo, Yoshiyuki Seike, Tatuo Mori: Effect of Fullerene between Electron Extraction and Perovskite Layers for Organic Perovskite Solar Cells, 2018 KJF International Conference on Organic Materials for Electronics and Photonics (KJF-ICOMEP 2018), P-221, (2018). (Nagaragawa Gifu)
Vincent Obiozo Eze, Hiyoyuki Okada, Yoshiyuki Seike, Tasuo Mori, Enhancing the performance of perovskite solar clles using additive and solvent vapor annealing treatments, 10th International Symposium on Organic Molecular Electronics (ISOME2018), O10-2, (2018), (Fukuoka).
Naoki Hirihata, Kazumasa Uetani, Daiki Tangiku, Yoshiyuki Seike, Tatsuo Mori: Properties of organic thin-film photovoltaic cells based on PTB7 and C60 using additive of PCBM, 10th International Symposium on Organic Molecular Electronics (ISOME2018), P-22, (2018), (Fukuoka).
Daiki Tangiku, Nana Inagaki, Seiya Shiiba, Tatsuo Mori, Yoshiyuki Seike: Low Temperature Deposition Technique of Photovoltaic Cell by Electrospray, 10th International Symposium on Organic Molecular Electronics (ISOME2018), P-20, (2018), (Fukuoka).
Yoshiki Kondo, Masaki Kawai, Vicent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori, Fabrication Using 2-step and Air-Flowing Process for Organic Perovskite Solar Cells, 10th International Symposium on Organic Molecular Electronics (ISOME2018), P-17, (2018), (Fukuoka).
Yoshiyuki Seike, Daiki Tangiku, Hirohito Katsuta, Taichi Ishikawa, Tatsuo Mori: Influence of Metal Contamination in the Organic Active layer of the Organic Thin Film Solar Cell, Asia-Pacific Hybrid and Organic Photovoltaics Conference (AP-HOPV 18), 086, (2018), (Kitakyushu, Japan).
Daiki Tangiku, Tatsuo Mori, Yoshiyuki Seike: Performance Enhancement of Organic Photovoltaic Cell by Electrosoray Method, Asia-Pacific Hybrid and Organic Photovoltaics Conference (AP-HOPV18), 098, (2018), (Kitakyushu, Japan).
Yoshiyuki Seike, Daiki Tangiku, Tatsuo Mori: Deposition Technique of Organic Thin Film Photovoltaic Cell by Various Spray Methods, 3rd Japan-Thailand Joint Symposium on Advanced Nanomaterials and Devices for Electronics and Photonics (JT-AND 2018), p.p.53, (2018), (Bangkok, Thailand).
2017
Hiroyuki Okada, Kenta Saito, Vincent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Organic Perovskite Solar Cells with Air-Assisted-Flow, International Workshop on Green Energy System and Device (IWGESD2017), P-22, (2017), (Aichi, Japan).
Yoshiyuki Kondo, Masaki Kawai, Hiroyuki Okada, Vincent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Perovskite Solar Cell Using Solvent Engineering”, International Workshop on Green Energy System and Device (IWGESD2017), P-23, (2017), (Aichi, Japan).
Naoki Hirohata, Kenichi Ueda, Kokoro Kimura, Daiki Tangiku, Yoshiyuki Seike, Tatsuo Mori: Fabrication of Organic Thin-Film Solar Cells Using Unsubstituted Fullerene, International Workshop on Green Energy System and Device (IWGESD2017), P-25, (2017), (Aichi, Japan).
Shogo Miyagawa, Hayato Watanabe, Taishi Segawa, Taishi Segawa, Yoshinori Kobayashi, Keiji Miyachi, Tatso Mori, Yoshiyuki Seike, Static Electric Preventing at the Spray Cleaning in the Electrical Device Manufacturing, International Workshop on Green Energy System and Device (IWGESD2017), P-26, (2017), (Aichi, Japan).
Taichi Ishikawa, Hirohito Katsuta, Daiki Tangiku, Tatsuo Mori, Yoshiyuki Seike: Influence of Metal Contanination in the Active Layer of the Organic Thin Film Solar Cell, International Workshop on Green Energy System and Device (IWGESD2017), P-29, (2017), (Aichi, Japan).
Daiki Tangiku, Tatsuo Mori, Yoshiyuki Seike: Deposition Technique on the Organic Thin Films Solar Cell by Electrospray, International Workshop on Green Energy System and Device (IWGESD2017), P-30, (2017), (Aichi, Japan).
Nana Inagaki, Seiya Inagaki, Daiki Tangiku, Tatsuo Mori, Yoshiyuki Seike: Challenge to the organic thin film solar cell production which can be put on the smart contact lens, International Workshop on Green Energy System and Device (IWGESD2017), P-30, (2017), (Aichi, Japan).
D. Tangiku, T. Mori, Y. Seike: Deposition of Organic Thin Film by Electrospray, The 9th Asian Conference on Organic Electronics (A-COE), p80, (2017), (Daejeon Korea).
V. O. Eze, Y. Seike, T. Mori: High-Performance Planar Perovskite Solar Cells with WOx/C60 Electron Transporting Layer, The 9th Asian Conference on Organic Electronics (A-COE), p144, (2017), (Daejeon Korea).
H. Okada, Y. Kondo, M. Hoshino, V. O. Eze, Y. Seike, T. Mori: Low Temperature Fabrication of Inverted Organic Perovskite Solar Cells Using Air-Assisted Flow, The 9th Asian Conference on Organic Electronics (A-COE), p145, (2017), (Daejeon Korea).
V. O. Eze, Y. Seike, T. Mori, Effect of Fullerene C60 Interlayer in Enhancing the Performance of Amorphous Tungsten Oxide Planar Perovskite Solar Cells, 9th International Conference on Molecular Electronics and Bioelectronics M&BE9, (2017), P-C024 311.
D. Tangiku, K. Ami, T. Mori, Y. Seike, Deposition of the Active Layer in the Organic Thin Film Solar Cell by Electrospray, 9th International Conference on Molecular Electronics and Bioelectronics M&BE9, (2017) P-A011 193.
H. Okada, K. Saito, V. O. Eze, Y. Seike, T. Mori, Effect of Air Assisted Flow on Organic Perovskite Solar Cells Fabricated by One Step Spin-Coating Method, EM-NANO2017, (2017) PO1-52.
2016
V. O. Eze, Y. Seike, T. Mori: CH3NH3PbI3 perovskite solar cells employing Cu-phthalocyanine doped poly-3-hexylthiophene hole-transporting layer, The 8th Asian Conference on Organic Electronics, p91 Kyoto (2016).
M. Sakaida, D. Tangiku, K. Ami, Y. Seike, T. Mori: Evaluation of Characteristics on Inverted OLED using Ethoxylated Polyethylenimine, The 8th Asian Conference on Organic Electronics, p78, Kyoto (2016).
V. O. Eze, Y. Seike, T. Mori, Cu-phthalocyanine doped poly-3- hexylthiophene based hole-transporting layer for efficient mesoscopic CH3NH3PbI3 perovskite solar cells. The 11th International Conference of Electroluminescence and Optoelectronic devices (ICEL). 2016.
～2015
Yoshiyuki Seike, Yasushi Koishikawa, Mikio Kato, Keiji Miyachi, Syuhei Kurokawa, Akinari Doi, Hitroshi Miyazaki, Chihaya Adachi: The study of film formation process by electrospray method to manufacture high productivity organic light-emitting diode devices, Display Week 2014 (SID), P1593.
Yoshinori Kobayashi, Hiroki Akenaga, Yoshiyuki Seike, Keiji Miyachi, Shizuyasu Ochiai, Takuya Morimoto, Xiaoling Ma , Takao Nishikawa, Tasuo Mori: A Study of the Spray Coating for Organic Photovoltaic Cells, Molecular Electronics and Bioelectronics (M&BE7) 2013, P47.
Yoshiyuki Seike, Masanori Ohtubo, Kenji Maruyama, Futoshi Shimai, Hiroyuki Akenaga Hiroshi Morishita, Keiji Miyachi, Masahiko Amari, Toshiro Doi and Syuhei Kurokawa: Conformal Resist Coating Technique in the Trough-Silicon Via (TSV) with a Rotary Atomizer Aerosol Spray Advanced Metallization Conference 2012, P72-73.
Yoshiyuki Seike, Masanori Ohtubo, Futoshi Shimai, Kenji Maruyama, Hiroyuki Akenaga, Yoshinori Kobayashi, Keiji Miyachi, Masahiko Amari: Conformal Resist Coating Technique of the Semiconductor Devices by the Rotary Atomizer Spray, The Third International Conference on nanoManufacturing, 2012 , P79-82.
Yoshiyuki Seike, Keiji Miyachi, Syuhei Kurokawa, Osamu ohnishi and Toshiro Doi: Semiconductor Devices Cleaning with Liquid Aerosol Nozzle using Rotary Atomizer Method, Advanced Metallization Conference 2010, P156-157.
Yoshiyuki Seike, Keiji Miyachi, Tatsuo Shibata, Yoshinori Kobayashi, Syuhei Kurokawa, Toshiro Doi : Development of a Revolution Atomizing Two Fluid Cleaning Nozzle (RAC nozzle) for Post-CMP Cleaning, International Conference on Planarization/CMP Technology 2009, p1961-1965.
Syuhei Kurokawa, Keiji Miyachi, Yoshiyuki Seike, Shinichi Izumikawa, Shinichi Haba, Toshiro Doi: Pad Conditioning Using a High Pressure Micro Jet (HPMJ) to Improve Life Span of Unwoven Fabric Pads in CMP for Silicon Wafers, International Conference on Planarization/CMP Technology 2008, p403-408.
Keiji Miyachi, Taro Akama, Syuhei Kurokawa, Toshiro Doi, Kimio Nakayama, Yoshiyuki Seike, Yoji Matukawa, Yoji Umezaki: CMP characteristics of silicon wafer with a micro-fiber pad, and pad conditioning with high pressure micro jet (HPMJ), The 5th International Symposium on Advanced Science and Technology of Silicon Materials, 2008, P93-97.
Keiji Miyachi, Yoshiyuki Seike, Shinichi Haba, Syuhei Kurokawa, Toshiro K. Doi: Impact of a High Pressure Micro Jet (HPMJ) on the conditioning and cleaning of unwoven fabric polyester pads in silicon polishing, International Conference on Planarization/CMP Technology 2007, p403-408.
Yoshiyuki Seike, Mineo Takaoka, Keiji Miyachi, Hyo-sang Lee, Ara Philipossian, Toshiro Doi: Development of a Pad Conditioning Method for ILD CMP using a High Pressure Micro Jet System, Proceedings of The 2st Pac-Rim International Conference on Planarization CMP and its Application Technology, p327-333.
Yoshiyuki Seike, Mineo Takaoka, Keiji Miyachi, Hyo-sang Lee, Toshiro Doi, Ara Pilipossian: Development of a high pressure micro Jet (HPMJ) Pad Conditioning System for Interlayer Dielectric Chemical Mechanical Planarization Process, Proceedings of The 1st Pac-Rim International Conference on Planarization CMP and its Application Technology, p199-205.
Yoshiyuki Seike, Sayuri Kawashima, Keiji Miyachi, Toshiroh Karaki Doy: A Development of Super High-Pressure Micro Jet System for Pad Dressing and Post - CMP Cleaning in CMP Process, 2002 VLSI Multilevel Interconnection conference, p411-414.
Yoshiyuki Seike, Sayuri Kawashima, Shigeru Taniguchi, Ryosuke Usui, Takaho Saito, Keiji Miyachi, Toshiroh Karaki Doy: A New Pad Dressing Technique using Super High-Pressure Micro Jet in CMP, Advances in Abrasive Technology Ⅲ P197-204, The Society of Grinding Engineers.
Hyo-sang Lee, Darren DeNardis, Ara Philipossian, Yoshiyuki Seike, Mineo Takaoka, Keiji Miyachi: Termal, Tribological, and Removal Rate Characteristics of Pad Conditioning in Copper CMP, Proceedings of The 2st Pac-Rim International Conference on Planarization CMP and its ApplicationTechnology, p308-314.
Y.Uchida, S.Nohira, Y.Seike, H.Shingu, T.Sumi, H.Furukawa, J.Yamada: A Control System for Dual-Axis Liner Motor, ’92 Korean Automatic Control Conference, International Session 15, 340-343 (Seoul Korea).
Y.Takada, Y.Seike, Y.Uchida, Y.Akao, J.Yamada: A Microcomputer Controlled Alignment System using Moire Sensor: ’91 Korean Automatic Control Conference, International Sessions, 1961-1965, (Seoul Korea).
